Indoor-use classification for flooring products and solutions intended for enclosed sports, commercial, gym, dance and acoustic-control environments.
Key factors that determine which product is right for your indoor project. Specific performance data, certifications, and stock information are held at the product level.
Concrete must be flat, dry, and structurally sound before installation. Moisture content, surface regularity (typically ≤ 2 mm / 2 m), and compressive strength all affect adhesion and long-term performance. Confirm subfloor conditions with your installer before specifying a product.
Foot traffic intensity, rolling loads, and point loads from equipment determine required wear layer thickness, density, and surface finish. Sports courts, gyms, and commercial corridors each carry different load profiles -- product selection must match actual use conditions.
PVC rolls typically require full-spread adhesive or loose-lay with tape at seams, followed by heat-welding for watertight joints. Rubber rolls and mats may use adhesive or interlocking. PP tiles click-lock without adhesive. Each method has specific subfloor, acclimatisation, and finishing requirements.
Indoor sports and commercial spaces may require impact sound insulation, vibration damping, or sport-specific performance standards (e.g. EN 14904, FIBA, BWF). Acoustic underlayers, foam backing thickness, and surface hardness all contribute. Confirm applicable standards with the project consultant before specifying.
Certifications (fire rating, VOC/IAQ, slip resistance, sport performance) are issued per specific product reference and test batch. One certificate does not cover all products or all thicknesses. Always verify that the certificate on file matches the exact product code, thickness, and colour you are ordering.
Wear layer thickness, surface coating type, and cleaning protocol determine service life. Abrasive cleaning agents, improper machine scrubbing, or prolonged exposure to standing water will accelerate wear. Confirm recommended maintenance procedures with the product technical data sheet.
Data boundary: Performance specifications, certification references, stock levels, pricing, and MOQ are held at the individual product level. This page provides environment-level guidance only. Always verify product-specific data before finalising a specification.
All products below are tagged for indoor environments. Click any product to view full specifications, available thicknesses, patterns, and stock status.
Indoor PVC Sports Flooring
PVC-INDOOR
Indoor PVC sports flooring in multiple thicknesses and patterns for indoor courts, fitness and dance-room applications.
View specificationDance Floor
DANCE-FLOOR
Dedicated dance-flooring product record prepared for the latest ACF structure; technical specifications remain pending source confirmation.
View specificationHomogeneous Vinyl Flooring
VINYL-HOMO
Single through-body homogeneous commercial vinyl flooring for healthcare, education and public interiors.
View specificationHeterogeneous Vinyl Flooring
VINYL-HETERO
Multilayer heterogeneous commercial vinyl flooring with multiple thickness and wear-layer combinations.
View specificationRubber Rolls
RUBBER-ROLLS
Indoor rubber rolls for gym, fitness and impact-cushioning flooring applications.
View specificationRubber Mats
RUBBER-MATS
Indoor rubber mats, including interlocking variants, for gym and impact-cushioning flooring applications.
View specificationPP Sports Tiles
PP-SPORTS-TILES
Modular PP sports tile family covering documented KD-S01 through KD-S010 models.
View specificationSoundproofing Mats
SOUNDPROOFING-MATS
Soundproofing and vibration-control underlay family covering polyurethane rubber, rubber particle, cork rubber and non-woven materials.
View specificationApplication categories covered by indoor products in our range. Each application page lists compatible products and technical considerations.
Badminton
5 products
Basketball
5 products
Gym & Fitness
7 products
Multisport
2 products
Pickleball
4 products
Sports Courts
6 products
Table Tennis
4 products
Tennis
4 products
Volleyball
3 products
Commercial Spaces
3 products
Commercial & Public Spaces
3 products
Education & Healthcare
3 products
Public & Office Spaces
3 products
Children's Spaces
4 products
Roller Skating
1 product
Soccer
1 product
Acoustic & Vibration Control
2 products
Curated solution guides for indoor environments -- covering customer requirements, product selection logic, and technical considerations.
Req: Confirm equipment type and load, impact intensity, flooring format, substrate, edge transitions, acoustic target and installation...
View solution guideReq: Confirm project type, traffic, homogeneous vs heterogeneous construction, desired thickness/design, substrate, fire/IAQ requirements and installation schedule.
View solution guideReq: Confirm sport type, court dimensions, substrate condition, flooring format, required cushioning, line-marking layout, quantity and required...
View solution guideProduct categories available for indoor environments. Each category page shows full specifications, available patterns, and stock status.
| Product Family | Explore |
|---|---|
| Dance Floor | View |
| Heterogeneous Vinyl Flooring | View |
| Homogeneous Vinyl Flooring | View |
| Indoor PVC Sports Flooring | View |
| PP Sports Tiles | View |
| Rubber Mats | View |
| Rubber Rolls | View |
| Soundproofing Mats | View |
Specifications, certifications, stock, and pricing are listed at the individual product level -- not at category level.
Answer these questions before specifying a product for a indoor environment. They help us give you an accurate recommendation the first time.
What sport or activity is the floor for?
Different sports have different requirements for shock absorption, ball rebound, surface friction, and marking layouts. Confirm the primary sport before selecting a product family.
What is the subfloor condition?
Flatness, moisture level, and compressive strength must meet product installation requirements. Subfloor remediation may be needed before installation.
What traffic and load levels are expected?
High-traffic commercial corridors need thicker wear layers and higher density. Sports courts need sport-specific performance rather than just durability.
Are there acoustic or vibration requirements?
Specify whether impact sound insulation (ΔLw) or vibration reduction is required. This may require a dedicated underlayer in addition to the surface flooring.
Which certifications are required by the project?
Confirm fire rating class, VOC/IAQ standards, and sport certification (EN 14904, FIBA, BWF, etc.) with the project consultant. We will verify which products hold matching certificates.
What is the project timeline and quantity?
Stock availability, MOQ, and production lead time depend on product, specification, colour, and quantity. Share your project deadline early so we can confirm feasibility.
Ready to specify?
Share your project details
Tell us application, environment, area, thickness requirements, timeline, and destination. We'll confirm product fit, stock, pricing, and lead time.
Share your application, environment, area, and timeline. We'll confirm product fit, stock, pricing, MOQ, and lead time -- no obligation.
Fast response
Stock, price, and lead time confirmed within 1 business day for standard products.
Technical documentation
TDS, test reports, and certificates provided for matched products.
Samples available
Standard samples free of charge; customer covers courier cost.
